ACB

Hot forming presses - FCC

Print E-mail
  • Box Furnace Presses
    A small furnace with one or several hole(s) in the roof and the walls to allow the main ram and others actuators to move inside the furnace.
    Typically, presses of low tonnage (below 100 tons) using tooling with a side surface larger than the lower and upper surfaces.
    The Furnace can be electrically-heated or gas-fired.

 

  • Heating Platens Presses
    Various kinds of structure: c-frame, single welded modular structure, four-post columns presses…
    Metallic or Ceramic platens.

 

  • Accessories: side-pushers, blank-holder, tool elevator, tool clamping system, twisting device
  • Controls of Hot Forming Presses

fcc pressesWhen the upper and lower surfaces of the tool are larger than the side surfaces, it is recommended to use heating platens presses rather than box furnace presses.
Heating platens presses are built either with a welded frame concept or with a 4 columns design.
Welded frame concept allows a access from front and rear sides and is recommended for platen with smaller than 1.5 m.

 <<Click to enlarge

Machine range: from 100T to 500T

FCC_640X480


FCC 150 FCC 150